Visit us at one of our locations to purchase any of these products.
Designed specifically for spray application to fill voids and create a smooth, uniform surface on interior masonry block. It's packaged at a sprayable viscosity and is formulated with raw materials to minimize tip clogging. Super Kote 5000 Block Filler can also be applied by brush or roller.
Learn MoreTexcrete Direct-to-Concrete Waterproofer is a VOC-compliant waterproofing coating that can be applied directly to both cured and uncured high-pH concrete. Available in a range of textures, it requires neither primer nor filler when applied to smooth masonry surfaces.
Learn MoreA clear, water-repellent sealer that produces a breathable barrier on masonry. Prevents chlorine penetration and reduces cracking, dirt pickup, efflorescence and damage from freezing/thawing cycles. Penetrates deep into substrates without changing their appearance.
Learn MoreA 100% Acrylic Elastomeric Coating designed to keep damaging water and moisture vapors out of commercial and residential structures. It creates a flexible waterproofing membrane that prohibits wind-driven rain from entering through the coating film.
Learn MoreWaterBlock acrylic masonry waterproofer is designed to seal interior and exterior masonry surfaces (basement walls, foundations, and retaining walls). Alkali resistant and provides positive sealing and waterproofing over bare concrete block, brick, stucco or tilt-up concrete walls.
Learn MoreVisit us at one of our locations to purchase any of these products.
TuffCrete Waterborne Acrylic Waterproofing Concrete Stain is a water-reduced acrylic concrete coating designed for application on interior or exterior masonry surfaces. It may be applied in one coat, as a stain, or in two coats for an opaque finish.
Learn MoreTough Shield Floor and Patio Coating is a waterborne, acrylic enamel designed to produce a rugged, durable finish with good abrasion resistance. For use on interior and exterior floors and patios and a variety of other substrates.
Learn MoreProvides a durable, skid-resistant finish for interior or exterior. Imparts excellent color retention, abrasion resistance, and resistance to ponding water. Sure Step is water-reduced which allows for fast drying, easy application, and easy clean up.
Learn MoreVisit us at one of our locations to purchase any of these products.
Epoxy-Shell 1000 provides durability and superior adhesion properties. For use on a variety of substrates including concrete, tile and laminate. Ideal for large indoor applications.
Learn MoreEpoxy-Shell WB combines durability and superior adhesion properties for a fast return-to-service, that resists abrasion and scratches. Ideal for priming high traffic areas.
Learn MorePoly-Shell™ 7000 & 8000 provide the latest in Polyaspartic coating technology. Extremely resistant to heat (up to 350°F), UV rays, and harsh chemicals, including salt, oil and gasoline.
Learn MoreMoisture vapor control system formulated to bond to concrete with relative humidity. Designed to block moisture for virtually all types of flooring. Excellent adhesion.
Learn MoreProvides both heat and chemical resistance and protection against UV rays. Excellent bonding strength and high tolerance for moisture with resistance to water exposure and high humidity.
Learn MoreA fast drying and easy to apply concrete stain, that uses the latest in UV stable colorant technology. Creates unique, multi-colored translucent colors that will not peel, chip, or flake.
Learn MoreA clear, high-gloss, high-solids, solvent-based UV stable acrylic sealer. Provides a strong, beautiful, maintenance-free finish that enhances and deepens the surface's natural color.
Learn MoreFormulated to deeply penetrate into concrete cracks providing structural repair. Ideal to seal off cracks and saw-cuts to further enhance a seamless flooring environment.
Learn MoreMetallic pigments combined with Seal Krete's 100% solids Epoxy-Shell 100, create a shiny, reflective floor. Metallic pigments create depth and movement, replicating molten metal or ocean waters. Photo above by R.L. Surfacing.
Learn MoreFill out the form below, and a representative will contact you as soon as possible!
You are also welcome to contact our corporate office at (570)-839-2840, or find a location closest to you.